When the cars starts, please do not connect the car charger easy to burn car charger

When the cars starts, please do not connect the car charger easy to burn car charger.

Many friends like to travel in the free time by car, and car charger is necessary for traveling by car to prepare for long-distance travel to mobile phones, cameras, laptops have a "mobile power", but in fact the choice of car charger and Use great stress, a little careless or cause an accident.

 A good car charger must have a fuse, now online shop car charger number and style are more and more, and the price is not high, basically are 20 yuan -60 yuan range, and some shop to buy The car charger is only 10 yuan or less. "Low-cost car charger there are many security risks." We do not underestimate the car charger, which is the core component of the pc board chip, through the entire circuit board, the car cigarette lighter on the 12v power into a mobile phone Of the 5v power supply. But the problem is the car in the process of driving the voltage is not stable, which makes the car charger using the pc board chip than the average home charger higher, so the cost is not low, some poor chip charger has appeared leakage hazards To the case of human life. In addition, in line with the national standard car charger must have a fuse to prevent the current load is too high to burn the phone, but if the car charger in 15 yuan, the fuse is basically "cut" Lack of fuses of the car charger, in the event of extreme cases, burn the phone is small, serious will cause a fire.

      

 Therefore, we buy car charger, the first to buy a brand awareness of the product, while the purchase to the business to confirm that the car charger with a fuse, for the price is too low, or the volume is too small car charger Should be carefully chosen.

 Not only choose car charger has to pay attention to, in the course of the use should not be the effect, we must then start the vehicle and then connect the charger to the phone or camera charging, because the vehicle starts a large current, easy to car charger burned, if If you go to the cold area (minus), should be in the car for some time, the car temperature rises above zero and then use the car charger; try not to use in the rainy days. If you do not use the car charger, Car charger; red finished the power will be timely pull out the plug.

Aslan Electronics is a professional car charger factory, in the charging industry has been 12 years of history, welcome to see the factory, welcomed the inquiry. More info, pls click: www.aslan-china.com . jane@aslanchina.com

There are 5 considerations you need to let consumers know about car chargers

There are 5 considerations you need to let consumers know about car chargers.

Note 1: Before the start of the vehicle is best not to insert the car charger, or the power supply connected to the phone, so as to avoid the vehicle when the instability caused by damage to the charger and mobile phone.

Note 2: When the car charger used for a long time after the dirty, do not use strong chemicals, cleaning agents, strong detergent cleaning charger. Wipe with a wet tissue and dry it to avoid damage.

Note 3: In particular, pay attention to the use of the car charger should not be free to throw, landing, beat or shake the charger. Especially in summer when the sun was sun exposure, the car temperature over 45 degrees, temporarily do not use the charger, and this will seriously damage the car charger inside the circuit board.

Note 4: car charger is an electronic device, the owner in the course of the use, do not put it in a long time in a humid environment, so as not to its internal electronic components caused by varying degrees of corrosion or oxidation. If you accidentally sprinkle water on the charger should be removed immediately and dry, so as to avoid damage to the circuit board.

Note 5: After the vehicle is turned off the car charger should be unplugged, if long-term plug in the power interface, the contact part of the two may be corrupt and difficult to remove. Although 80% of the vehicles are vehicles when the key is removed after the cigarette lighter to stop power supply, but there are some car cigarette lighter is a continuous power supply.

Aslan Electronics is a professional car charger factory, in the charging industry has been 12 years of history, welcome to see the factory, welcomed the inquiry. More info: www.aslan-china.com    jane@aslanchina.com

Best usb car charger manufacturer from China

Usb car charger manufacturer car charger for iphone ipad samsung

Today continues to talk about how to maintain the car

Brake safety should not be overlooked:

Summer is also a rainy season. During the rainy season, heavy rain often causes wet pavement and reduces the coefficient of friction between the tires and the road. Therefore, a thorough check of the braking system of the car is needed to avoid any problems. Rain days often use wipers, so it is necessary to check the windshield wiper

The air-conditioning system matters a lot:

High temperature in summer, if there is no air conditioning is certainly can not stand, check the air conditioning system, including electrical equipment inspection and pipeline inspection, circuit inspection car safety inspection car charger plug is intact, car charger should pay attention to choose the regular car manufacturers, to avoid the accident

Internal cleaning is critical:

The long opening of the air conditioner closes the window, causing air pollution in the car, so it is necessary to thoroughly clean the car or use an air purifier

Aslan Electronics is a professional car charger factory, in the charging industry has been 12 years of history, welcome to see the factory, welcomed the inquiry. More info, pls click: www.aslan-china.com    jane@aslanchina.com

Summer is over. Have you learned how to keep your car?

The summer, the temperature of more than 30 degrees is not only a test of people at the same time, our car is a challenge, if you are not the science car, your car will not be able to endure the hot weather, so, how to maximize the care of our car? Today tell you about the summer car maintenance common sense.

Scientific waxing to protect paint surface:

Summer temperatures rise, the sun often burst into the sun, the car hit a wax, waxing can give the car's paint to provide a protective film, to avoid scratches or car paint oxidation.

Check the oil level to prevent evaporation:

Hot weather, oil and water evaporation will increase, so must tighten the fuel tank cap, prevent oil leakage, and the vehicle parked in the shade cool, don't let the engine flameout, continue to slow, open lid machine cooling, we always be alert, the summer heat, the car is easy to spontaneous combustion.

Cheer up properly to prevent a flat tire:

Sun exposure of the road temperature is very high, the loss of automobile tires more, we must regularly check tire pressure, to prevent tire. If the tire pressure is not suitable, it is easy to cause oil consumption to increase, and may even cause a flat tire, causing unnecessary trouble.

Aslan Electronics is a professional car charger factory, in the charging industry has been 12 years of history, welcome to see the factory, welcomed the inquiry. More info, pls click: www.aslan-china.com    jane@aslanchina.com

Manufacturing process of car charger

Before we know a lot about the car charger for use, also know how to use and how to choose the quality is reliable, safe and convenient car charger, car charger, for this beautiful, how it is made? That many people do not understand the word, today, Xiaobian take you look as professional car manufacturers, the company said production process car charger.

First, we must first determine the appearance design, car charger product specifications; the choice of what kind of appearance and what kind of design is the way we can choose, of course, can also be customized to customer car manufacturers according to their own needs. When it is ready, it can be handed over to the designer to produce the product drawings, and then select the material to apply to the material provider for customizing the shape of the shell.

Secondly, determine the circuit board, making wires, resistors, fuse, metal parts and product specifications; the shell is calculated, and then give it to the assembly from the smallest parts to assembly; assembly workers, according to every link of specialized staff for assembly.

Then, product testing, each product must undergo rigorous testing. Product testing is divided into quality testing and power detection, and to reach the international FCC, RoHS, CE certification standards. According to the quality test is whether the product can be used normally, power detection is a product does not meet customer requirements of the rated voltage or rated current, only two standards are standard is the final product.

Finally, the packaging, a good product, and finally a good package, after completion is considered a car charger, the real production completed.

A company needs not only a good corporate culture, but also need a strong executive power, Aslan electronic company is in accordance with the strict production management system, coupled with careful and meticulous work, adhere to professional users, car charger complete solutions for the goal, to become a professional manufacturer of car charger.

Aslan Electronics is a professional car charger factory, in the charging industry has been 12 years of history, welcome to see the factory, welcomed the inquiry. More info, pls click: www.aslan-china.com    jane@aslanchina.com