Thursday, August 31, 2017

There are 5 considerations you need to let consumers know about car chargers

There are 5 considerations you need to let consumers know about car chargers.
Note 1: Before the start of the vehicle is best not to insert the car charger, or the power supply connected to the phone, so as to avoid the vehicle when the instability caused by damage to the charger and mobile phone.
Note 2: When the car charger used for a long time after the dirty, do not use strong chemicals, cleaning agents, strong detergent cleaning charger. Wipe with a wet tissue and dry it to avoid damage.

Note 3: In particular, pay attention to the use of the car charger should not be free to throw, landing, beat or shake the charger. Especially in summer when the sun was sun exposure, the car temperature over 45 degrees, temporarily do not use the charger, and this will seriously damage the car charger inside the circuit board.
Note 4: car charger is an electronic device, the owner in the course of the use, do not put it in a long time in a humid environment, so as not to its internal electronic components caused by varying degrees of corrosion or oxidation. If you accidentally sprinkle water on the charger should be removed immediately and dry, so as to avoid damage to the circuit board.
Note 5: After the vehicle is turned off the car charger should be unplugged, if long-term plug in the power interface, the contact part of the two may be corrupt and difficult to remove. Although 80% of the vehicles are vehicles when the key is removed after the cigarette lighter to stop power supply, but there are some car cigarette lighter is a continuous power supply.
Aslan Electronics is a professional car charger factory, in the charging industry has been 12 years of history, welcome to see the factory, welcomed the inquiry. More info: www.aslan-china.com    jane@aslanchina.com

Wednesday, August 30, 2017

Smart Car Charger

Smart Car Charger
Model: CC-156
Specifications: double mouth
Features
Safe and efficient. Built-in security management chip. Overcurrent protection, overcharge protection, overload protection, over temperature protection, overvoltage protection, undervoltage protection, short circuit protection and other seven safety intelligent protection. Power supply, to protect your car and digital products, security. Security protection occurs, the intelligent power supply; excluded, the automatic recovery of power supply. Using high-quality flame retardant materials, high dielectric strength, safe and secure.

Intelligent power supply. Built-in strong and stable power supply module, the output current of 1 ~ 3.1A, intelligent identification of digital products, intelligent regulation of current and voltage, for flat, high-capacity mobile phones and other digital products, high-quality power supply.
Dual USB output. At the same time for the two digital products power supply.
Contacts are stable. Professional design contacts, to ensure that the car charger and cigarette lighter contact with solid, stable power supply, put an end to driving and the use of poor contact.
Soft light. Built-in fashion blue LED indicator, soft not dazzling, do not interfere with driving.
High-end selection. VO level PC fireproof material, high quality environmental engineering materials, feel fine, high-end elegant.
Exquisite small. Do not take up the space of the car, easy to use and storage.
Environmental packaging. The use of environmentally friendly paper packaging to protect the ecological environment.
The main technical parameters
Input: DC 12 ~ 24V
Output: 5V 3100mA
Size: 25 × 59 mm (D. × H.)
Weight: 23g
Other parameters
Output Interface Type: Dual USB port
Material: VO level fire material
Colors: White, Black
Indicator: support
Product Certification: CE, FCC, RoHS
Instructions for use
The car charging into the car charger, USB charging data cable at one end into the car charger USB output port, the other end of the connection digital products, you can power. LED lights that contact with the power supply seat is good.
Applicable scope
Suitable for DC 5V input digital products. Ipad iphone ipod Samsung millet HTC Huawei ZTE GPS PSP camera camera
  Aslan Electronics is a professional car charger factory, in the charging industry has been 12 years of history, welcome to see the factory, welcomed the inquiry. More info, pls click: www.aslan-china.com . jane@aslanchina.com

Tuesday, August 29, 2017

What is the most important part of the car charger?

What is the most important part of the car charger? The answer is car charger scheme.
HC8815 car charger chip, 5V3A synchronous commutation car charger scheme

HC8815 overview
HC8815 is a single-chip synchronous step-down car charging chip.In the input voltage range can provide continuous 3 A load current, the current control mode has A fast transient response and uninterrupted flow detection, with soft start, low voltage protection, over temperature protection, over-current protection, and other functions, the current is only 0.3 mu A standby mode.HC8815 car charger can achieve 15W maximum
HC8815 characteristics
3A output current, 3.5 A peak current
Input voltage range 4.75 V ~ 30V
Internal integrated power MOSFET switching tube
The output voltage is adjustable between 0.925 V ~ 20V
Up to 95% efficiency
Adjustable soft start time
HC8815 application
Distributed power system
The network system
Notebook PC
 Aslan Electronics is a professional car charger factory, in the charging industry has been 12 years of history, welcome to see the factory, welcomed the inquiry. More info, pls click: www.aslan-china.com

Monday, August 28, 2017

Car charging scheme introduction

Car charging scheme introduction
Xl4001 / xl4002 car charging scheme 2.1 A car charger IC CX8505
Combined with the high pressure and BCD high suppression process xl4001, xl4002, xl4101, xl4102 products, the input voltage can be 5v - 40v, with constant current, constant pressure function, built-in overpressure, overflow, short circuit and overtemperature protection.For the market application of led drive and mr16 drive (1w / 3w led up to 10 series), the peripheral circuit is simple and stable.Constant current source output, maximum current can do 3a.Fixed switch frequency of 52khz. When the input/output voltage changes, the range of load current varies within plus or minus 1%.
When multiple leds are connected, the efficiency can reach 96% of the temperature protection (120 degrees Celsius).
Xl4001 (1w / 3w led up to 10 series) chip features:

* 5-40v input voltage range (limit voltage 50v)
* the output current of Max 2a
* built-in power mosfet has constant current, constant pressure function, built-in overpressure, overcurrent, short circuit and overtemperature protection
* 152khz fixed switch frequency
* when the input/output voltage changes, the load current varies in the range of plus or minus 1 percent.
* when multiple leds are connected, the efficiency can be up to 96%.
* overtemperature protection (120c)
* high temperature start - 20 ~ 85 degrees Celsius
* the over-current of each cycle protects the mr16 spotlights and led illuminates
        Aslan Electronics is a professional car charger factory, in the charging industry has been 12 years of history, welcome to see the factory, welcomed the inquiry. More info, pls click: www.aslan-china.com

Sunday, August 27, 2017

Safe car charger, not just car charger

In recent years, the safety problems caused by the quality of the car charger have occurred frequently, and the safety performance of the car charger has also attracted wide attention. A qualified car charger, charging and security should be the most basic protection, Aslan car charger, not just car charger, it is the body of the defenders. Breaking the traditional car charger a single charging function, giving car charger a new safety hammer function, distress moment car users quickly cut the seat belt smashing windows to escape, for the security to increase a layer of protection.

   Aslan car charger, using 6061-T6 high temperature aluminum alloy material, better cooling, green and safe non-toxic. The appearance of fire can be flame retardant, the charging temperature control in 0 ~ 60 ℃, to avoid the electronic equipment in the charging process because the temperature is too high and an explosion. Car charger design dual usb interface, support two electronic equipment at the same time charging, intelligent identification of electronic equipment required for charging current, the maximum output current of 3.1A, fast and safe. Circuit design, 12 ~ 24V standard wide input voltage design, trolley trucks can be applied. Using short circuit protection, input and output overvoltage protection, overheating protection and overcurrent protection, the maximum degree of security for the user to provide protection.
   In addition to the basic security and charging function, Aslan car charger has an exclusive patented design, the top of the car charger using pure stainless steel safety hammer hammer design, can easily break the glass easily escape, but also as a self-defense gadget, Criminals or criminals can be used to defend themselves. The overall front side of the car to hide the stainless steel cutter, in the emergency time you can remove the silicone protective cover, 5 seconds to cut the seat belt escape.
          A high quality qualified car charger, must be professional quality certification Caixing, self-selling boast no real material. Car charger industry quality standards are generally CE and Rohs certification, Aslan car charger have this in the inspection and get the relevant certificate.
          Aslan car charger in addition to safety performance, patented design and product quality, its appearance is very delicate, the use of all-metal material to create a smooth sense of lines, high-light processing, smooth and delicate touch, from the senses to high-end, distinguished The sense of use without losing identity. At the same time, it's small and lightweight, easy to carry. In the color to providered red, gold, gray space, rose gold, black five colors, elegant and elegant taste.

        Aslan Electronics is a professional car charger factory, in the charging industry has been 12 years of history, welcome to see the factory, welcomed the inquiry. More info, pls click: www.aslan-china.com

Friday, August 25, 2017

Do you sell car charger with these functions?

Last time the TV exposed 70% of the car charger on the market is substandard products, and this, many consumers do not understand what in the end is what the car charger is qualified? A car charger is not so simple for charging, charging around this function can also be extended to a lot of different characteristics, combined with the characteristics listed below and see your car charger has these features?

1 、 Car charger overload protection
The USB specification for current overload protection requirements is not more than 5A, if more than this value is likely to be caused by the vehicle charger components because of high temperature lead to serious damage or burning or explosion. Therefore, the basic requirement of a qualified car charger is to have overload protection, which is also a basic function of it.

2 、 car charger short-circuit protection
Short circuit protection is also a car the most basic request, if the event of a charging circuit, can burn the fuse, serious may also cause a fire, so, when you choose the car charger, short-circuit protection is a must, if you do not know should consult clear to businesses, must not be a joke.

3 、 car charger automatically switch off after flameout
The vast majority of the owners will choose to pull out the car charger in the car flameout, this is a very good habit, but there are also some car owners often forget, and some car flameout cigarette will continue to supply, if this time do not unplug the car charger, LED display lights will continue to light, this is a if the local power consumption, automatic power-off function car charger you have turned off, then the problem would not exist.


Of course, the car stalled after unplug the car charger and a benefit that can avoid the damage caused by the ignition when the car charger, because the vehicle ignition moment will produce strong currents, this time if the car continues to work, it is likely to be burned, so once again to tell you, be sure to unplug the car after the car stalled the charge, and then insert the ignition.
Aslan Electronics is a professional car charger factory, in the charging industry has been 12 years of history, welcome to see the factory, welcomed the inquiry. More info, pls click: www.aslan-china.com

Car owners must have a magic device: car charger (quick version)

Car owners must have a magic device: car charger (quick version)
        With the development of science and technology, more and more powerful performance of intelligent mobile phone, more and more features, but also brings another problem of power consumption is also more and more high, we have to face the mobile phone to charge the regular problems, then a lot of people will think of charging treasure, but for a family car, a car charger personal feeling more practical than charging treasure, neither the problem of inconvenient carrying, and no security risks, especially in the summer in the car put a charge treasure can become a time bomb. In fact, when it comes to car chargers, I believe we are not unfamiliar, but the market is common car charger mostly do not have fast charge function, today brought us a compatible mainstream fast charge protocol car charger (fast version)

 The car charger quick charge version has two USB output ports, one of which is green to support 9V2A or 5V2A fast charge interface, and the other to 5V1A common interface. The fast charging interface compatible with Hass FCP and other mainstream fast charging protocol.

        The interface panel is made of acrylic material with 2.5D arc surface, and it is bright as a mirror. The upper half of the car charger adopts aluminum alloy wire drawing technology, fashionable and beautiful, and also printed with the customer's logo.

        The lower part of the car charger adopts high temperature resistant and flame retardant PC material, with the information of product model, the relevant parameters and manufacturers, and the positive and negative pole contact piece is made of stainless steel, wafer polished very smooth, car charger overall workmanship is very fine, is absolutely the maker style.

        The car charger into the cigarette lighter socket, the power of the white car charger at the top of the indicator light is on, the panel not only marked the same color of the voltage and current of each output port is also very intimate to distinguish, we can easily identify the fast charge port, the port is ordinary. Now the general car will be equipped with a driving recorder, double mouth output design is very practical, both to meet the driving recorder, but also to achieve rapid charge mobile phones, it is perfect.

        Aslan Electronics is a professional car charger factory, in the charging industry has been 12 years of history, welcome to see the factory, welcomed the inquiry. More info, pls click: www.aslan-china.com

Thursday, August 24, 2017

Car charger factory to help you analyze how to choose 1A, 2A car charger ?

Car charger factory to help you analyze how to choose 1A, 2A car charger ?
       A is a unit of current is used to measure the size of the current standard, 1A is the current size differences compared with 2A, the corresponding charging time and charging speed is different, generally speaking, 1A charger charging time is better than 2A, charging more slowly.
  Car charger different with different current ratings, now the market is the highest DD338uu car charger, Aslan electronics company 4.8A in general, most of them are 1A, 2A, 3.1A also has 1.5A, the current car charger, which are designed for different electronic products. So how do you choose?

       Now the mobile phone is usually the output current of 1A, when we choose the car charger 1A just for the current configuration, can be assured; if we choose the 2A car charger for mobile phone charging, the charging time is shorter, faster, because the current 2A is greater than 1A, the corresponding efficiency is more high. So, can the two current cars be charged?

      Yes, if you use 1A charger charge is normal, with 2A charging, because the current is too large, a short period of time may be hot and hot phenomenon, but there will not be too much problem. A lot of users for the charging safety considerations more, but now the car charger have overcharge protection function, when the charging short-circuit device etc. will automatically cut off the power supply, ensure the safety of charging.
        Aslan Electronics is a professional car charger factory, in the charging industry has been 12 years of history, welcome to see the factory, welcomed the inquiry. More info, pls click: www.aslan-china.com

Wednesday, August 23, 2017

What are the advantages of Aslan car charger?

What are the advantages of Aslan's car charger?
        With the continuous development of the automotive industry, China has become the world's largest car market, according to incomplete statistics from the National Bureau of statistics, it is estimated that by 2020, China's automobile ownership will reach about two hundred million. Large car ownership also led to the rapid development of the automotive supplies industry, and a wide variety. Among them, the widespread use of car charger, showing the multi-functional, portable, stylish, security, has become the most concerned about the 4 characteristics of riders.


1.       The multifunction of car charger:
Multi functional car charger presented, provides dual SUB interface, two port can output 800MA and 2100MA different current, suitable for different power supply of digital products, on the one hand can charge mobile phone, PDA, IPHONE and other small power digital products, on the other hand, IPAD can provide power supply for high power GPS products. The car charge, direct charge, charge USB as a whole, to meet the charge under different conditions; at the same time this car charger appearance unique trend, dynamic line design, full of personality, outside the box with a new ABS material, good surface is bright, capricious, his stay in india.

2.       Portability of car charger:
No matter the portability is a major trend in car charger industry, it is a tendency in the present development of electronic products, so as to adapt to the trend of the habit of using riders, car charger for 12 years there has been a mini shape, the convenient carrying space, does not affect the car appearance, plug and play. And provide no less current, 2100 ma current output, you can for mobile phones, MP3, apple, smart phones, consoles, any digital products to support USB charging.

3.       The vogue of car charger:
Aiming at the high-end consumer groups of different riders, the fashion of the on-board charger also attaches great importance to manufacturers. General use of ABS materials and piano baking process, in addition to wrap a layer of 1 cm high transparent color PC green, so that the appearance of the product increased gloss, not only fashionable and delicate, and feel very good. Electricity has a stunning blue light indicator, more exquisite and comfortable fashion, has also been a high-end consumer favorite friends love.

4.       Safety of car charger:
Security, regardless of what products, are concerned about the vast number of consumers. Not only to buy products to buy at ease, but also to use assured. The guarantee is whether this product can through different certification bodies, and as far as I know, can get different certification in the car charger industry products is not much, but Aslan's products through the detection performance of CE, E-MARK, FCC security, CE, ROHS and other international certification. All of these powerful enough to protect the friends on the performance of the safety car charger.

        Aslan Electronics is a professional car charger factory, in the charging industry has been 12 years of history, welcome to see the factory, welcomed the inquiry. More info, pls click: www.aslan-china.com