Aslan Car Charger Factory

Thursday, September 28, 2017

Best usb car charger manufacturer from China

Wednesday, September 27, 2017

Usb car charger manufacturer car charger for iphone ipad samsung

Thursday, September 21, 2017

Today continues to talk about how to maintain the car

Brake safety should not be overlooked:

Summer is also a rainy season. During the rainy season, heavy rain often causes wet pavement and reduces the coefficient of friction between the tires and the road. Therefore, a thorough check of the braking system of the car is needed to avoid any problems. Rain days often use wipers, so it is necessary to check the windshield wiper

The air-conditioning system matters a lot:

High temperature in summer, if there is no air conditioning is certainly can not stand, check the air conditioning system, including electrical equipment inspection and pipeline inspection, circuit inspection car safety inspection car charger plug is intact, car charger should pay attention to choose the regular car manufacturers, to avoid the accident

Internal cleaning is critical:

The long opening of the air conditioner closes the window, causing air pollution in the car, so it is necessary to thoroughly clean the car or use an air purifier

Aslan Electronics is a professional car charger factory, in the charging industry has been 12 years of history, welcome to see the factory, welcomed the inquiry. More info, pls click: www.aslan-china.com jane@aslanchina.com

Wednesday, September 20, 2017

Summer is over. Have you learned how to keep your car?

The summer, the temperature of more than 30 degrees is not only a test of people at the same time, our car is a challenge, if you are not the science car, your car will not be able to endure the hot weather, so, how to maximize the care of our car? Today tell you about the summer car maintenance common sense.

Scientific waxing to protect paint surface:

Summer temperatures rise, the sun often burst into the sun, the car hit a wax, waxing can give the car's paint to provide a protective film, to avoid scratches or car paint oxidation.

Check the oil level to prevent evaporation:

Hot weather, oil and water evaporation will increase, so must tighten the fuel tank cap, prevent oil leakage, and the vehicle parked in the shade cool, don't let the engine flameout, continue to slow, open lid machine cooling, we always be alert, the summer heat, the car is easy to spontaneous combustion.

Cheer up properly to prevent a flat tire:

Sun exposure of the road temperature is very high, the loss of automobile tires more, we must regularly check tire pressure, to prevent tire. If the tire pressure is not suitable, it is easy to cause oil consumption to increase, and may even cause a flat tire, causing unnecessary trouble.

Tuesday, September 19, 2017

Manufacturing process of car charger

Before we know a lot about the car charger for use, also know how to use and how to choose the quality is reliable, safe and convenient car charger, car charger, for this beautiful, how it is made? That many people do not understand the word, today, Xiaobian take you look as professional car manufacturers, the company said production process car charger.

First, we must first determine the appearance design, car charger product specifications; the choice of what kind of appearance and what kind of design is the way we can choose, of course, can also be customized to customer car manufacturers according to their own needs. When it is ready, it can be handed over to the designer to produce the product drawings, and then select the material to apply to the material provider for customizing the shape of the shell.

Secondly, determine the circuit board, making wires, resistors, fuse, metal parts and product specifications; the shell is calculated, and then give it to the assembly from the smallest parts to assembly; assembly workers, according to every link of specialized staff for assembly.

Then, product testing, each product must undergo rigorous testing. Product testing is divided into quality testing and power detection, and to reach the international FCC, RoHS, CE certification standards. According to the quality test is whether the product can be used normally, power detection is a product does not meet customer requirements of the rated voltage or rated current, only two standards are standard is the final product.

Finally, the packaging, a good product, and finally a good package, after completion is considered a car charger, the real production completed.

A company needs not only a good corporate culture, but also need a strong executive power, Aslan electronic company is in accordance with the strict production management system, coupled with careful and meticulous work, adhere to professional users, car charger complete solutions for the goal, to become a professional manufacturer of car charger.

Tuesday, September 12, 2017

Revolutionary charger product -WiFi charger!

Recently, a university in the United States developed a wireless network (that is, we often say WiFi) charger for electronic equipment charger, -WiFi charger. That sounds a little weird. Isn't WiFi wireless signal received by our cell phone? How can this be used to recharge the batteries? Indeed, since the popularization of intelligent mobile phone, mobile phone battery technology has been a short board, the mobile phone manufacturers of mobile phone batteries to spend a lot of energy, but the harvest is not very optimistic, although now have wireless charging technology, can get rid of the data line, but this is not suitable for all mobile phone therefore, if a true WiFi charger, the charger will undoubtedly be the history of a revolutionary product.

This product is currently still optimized, has been achieved through the WiFi signal in the 10 meters for the digital camera for charging, its working principle, the researchers explained that this charger called WiFi backscatter technology, the foundation of this technique is to let the two no battery radio frequency equipment by backscattered radio for both sides signal communication. A radio frequency powered computer is a small device for computing and communicating that can be powered only by signals captured from radio frequency radio. The system consists of WiFi access points (routers) and customized charging sensors. The charging sensor is installed on the hardware device, which is mainly used to receive the electrical energy in the radio frequency signal (RF), and then convert the radio frequency signal into direct current for charging.

If the mobile phone charge, then, according to the current popularity of the WiFi, airport, bus, train station, restaurant and so many places are free to charge a mobile phone, don't have to worry about the lack of electricity, but until that day, I think the most angry is the mobile power supply manufacturers, because the basic with no mobile power. Maybe the smart mobile phone battery technology is now unable to go further, then the future development of science and technology in the mobile phone battery and battery technology research to extend mobile phone battery, this is not really an imagination.

Monday, September 11, 2017

Have you ever heard of a bio phone charger?

Now, several scientists in the United States are studying a biological charger that uses biological energy to charge electronic devices such as mobile phones. It sounds incredible. How can a living thing be used to recharge it? According to the United States, these scientists explained: a pot of green plants can emit energy to charge the mobile phone and other equipment through, each about 1.5 hours or so can be charged, the charging equipment, environmental protection and safety, the future is expected to maximize the benefit of green plants. We all know that the latest wireless charging technology, but biological charger is the first time heard, then, today we will see how this biological charger is charged.

This biological charger into the soil, with a data line connecting terminal on the pot, the plant will manufacture organic material to promote its growth in the process of photosynthesis, the photosynthetic conversion of light into chemical energy into electrical energy at last.

What is the principle of charging?

Around the roots of plants, microorganisms break down organic matter, produce energy, and plant growth, but release some of the current as a by-product. Sunlight enters plant chloroplasts, and water breaks down into oxygen, protons, and electrons. A biological charger is characterized by an electrode that captures electrons and then transfers them to electrical equipment in the form of current.

Many people worry that this will not affect the plant, this need not worry, because the charger generated voltage of only 5V, the current is only 600 Ma, basically no impact on plants. Such a convenient charger we can carry at any time, as long as we have around the plant, we are not afraid of mobile phone has no electricity, of course, we can see everywhere around the plant, we basically do not have to worry about mobile phone batteries out. So, what if it's on the bus? Suggest the owner friends prepared a car or car charger, charger for biological although the plants can, but one can only charge 1.5 hours, sometimes the power is not enough, the car filled the car, ready to ensure that electronic equipment we have electricity, this is the most important.