As a car chargers dealer, do you know the importance of flame retardancy in car chargers?

As a car chargers dealer, do you know the importance of flame retardancy in car chargers?

The engineer told me that the cost of the flame retardant shell was about 30% less than the cost of the flame retardant shell, and many manufacturers used non flame resistant shell materials instead of the flame retardant shell material.

An industry source told reporters that the safety performance of the car charger will generally include chips, contacts, housings and a number of capacitors, inductors and other components of 11. Many products that do not meet industry standards will reduce the number of components that guarantee stability and safety.

At the same time, the use of lower prices, poor quality materials and components, processing and production of car charger, these "downsizing" products, the cost is only about half of the standard products.

In addition to the cost problem, there is an important reason that the internal structure of the on-board charger is unreasonable. For example, the unreasonable structure of the safety device may cause the sensor to fail, thereby losing its proper protection function and causing potential safety hazard. Reporters in the car charger production and dealer survey process also found that through the reduction of security devices to reduce costs in the industry seems to have become commonplace routine practices.

The inspection engineer, and some products with a metal shell, the metal shell has good flame retardant property, but its shell with metal, lead between the anode and the cathode is very close, it is prone to short-circuit between the anode and the cathode of the power supply system, fault danger caused by car.

Detection of organization risk monitoring and inspection of the reporters were purchased have proved that most of the market selling car chargerare not up to the requirements of industry standards, some products have serious security risks. These substandard products, may damage the mobile phone and other external devices, may also circuit for cars and driving safety seriously affected, more likely to lead to fire equipment, even combustion vehicles, security risk is very great.

Experts recommend raising the "car charge" production access threshold

At present, our country has not the car charger mandatory national standard, only in 2011 to develop a communication standard of car charger safety performance is proposed for the defined requirements, but because this standard is not mandatory, binding is relatively small, has not caused enough attention to production enterprises.

Aslan Electronics is a professional car charger factory, in the charging industry has been 12 years of history, welcome to see the factory, welcomed the inquiry. More info, pls click: www.aslan-china.com

x